The 318 Dak oil pan WILL fit on a 360, I just installed my 360 today with
the old Dak 318 oil pan. I also used a new gasket and if you want, I'll
email you the part # tomorrow.
Sam South
95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
14.10@98.05
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: "Doug Myers" <dougmyers@starpower.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Sunday, July 15, 2001 8:53 AM
Subject: DML: Re: Re: Re: Re: 360 oil pan
> Hey Mike,
>
> Are you ABSOLUTELY positive? Why does Mopar show two different part
#'s
> for the gaskets then? 318 takes P5249931, 360 takes P5249932. Why would
they
> need two different gaskets for the same oil pan? If you did use a 318 oil
> pan on your engine, then cool.... I just want to make sure I don't run
into
> any problems.
>
> Doug Myers
> -------------
> '99 Dakota RC/SB 5.2L/5-speed/3.92SG
> K&N Gen II, B&F Billet TB, Hughes Stage 1 Intake, 180 T-stat,
> MP cam, MP headers, MP catback, MP plug wires, Accel Supercoil,
> Custom Computer by Ron Zimmer, Centerforce Dual Friction Clutch
>
> ""miggitymike"" <miggitymike@fast4x4.net> wrote in message
> news:002301c10d08$d61849e0$d44743d8@oemcomputer...
> > >>Will the 318 and 360 pans interchange on the magnums? I know they
won't
> on
> > the pre-mags....<<
> >
> > swap right over =) not a problem
> >
> > -miggity
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:06 EDT