I swapped the IAS motor with the one off my old TB, it was brand new and
started and idled smoother then the one that came with it. They both
whistled and started a little rough, but once the truck warms up it always
ran fine with the 318, no idle problems. I just assumed the starting issue
was due to the HP TB and didn't think much of it, by the way the TB worked
awesome on the 318, thanks Mike.
Sam South
95 Dak, 5.9L,3.90 LSD,5-speed
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: "miggitymike" <miggitymike@fast4x4.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, July 18, 2001 3:11 AM
Subject: DML: Re: 360 IS IN!!!!!(kinda long)
> >>One
> thing though, it seems to want to almost stall when coming to a stop and I
> press the clutch in, it drops to about 450-500 RPM's for 3-4 seconds then
> idles up to around 800 and stays there. <<
>
> IAS motor? The one on the tb is new, but ya' never know!
> just a thought... something I had been thinking about for when that tb
went
> on my 360...
>
> -miggity
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:07 EDT