they make a dandy funnel for dirt, sand, and other assorted debris to sit on
top of the plugs... then when one goes to remove the plugs, the
aformentioned dirt, sand, and other assorted debris can find it's way into
the cylinder.
__________________
Jon Smith
Raleigh, NC
'95 CC 318 4x4 auto
344rwhp/424tq
----- Original Message -----
From: "redmopar99" <redmopar99@ntlworld.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, July 26, 2001 4:14 PM
Subject: DML: Re: Re: Re: Spark plug heat shields
Why do they need to come out?
Aaron
99 RC V6 4X2
----- Original Message -----
From: Ryan G. <gogglesqq@home.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, July 26, 2001 8:11 PM
Subject: DML: Re: Re: Spark plug heat shields
> what kind of pliers are you using? a pair of 12" Channel locks make quick
> work of them
>
>
>
> I have those! Ill give it a try. I was using 6 inch linesman pliers.
They
> just happened to be handy at the time.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT