Hmmmm overkill, just a regular pair of needle nose will do it.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Thursday, July 26, 2001 11:35 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: Spark plug heat shields
what kind of pliers are you using? a pair of 12" Channel locks make quick
work of them
__________________
Jon Smith
Raleigh, NC
'95 CC 318 4x4 auto
344rwhp/424tq
----- Original Message -----
From: "Ryan G." <gogglesqq@home.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Thursday, July 26, 2001 1:51 PM
Subject: DML: Spark plug heat shields
I know Bernd had covered this in the past but I cant get these things to
budge. Using pliers i grasp them and attempt to twist and or pull and
nothing happens. Do i need to eat more Wheaties and pull harder or is there
another trick to it?
--Ryan
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT