He's right. I have to time mine just right to get the next code. It works
best for me to "bump" the off position to get the next code. HTH
Chris
'97 V6 with an estimated $7000 damage to my Dak :(
----- Original Message -----
From: <jon@dakota-truck.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Saturday, August 04, 2001 11:59 AM
Subject: Re: DML: Pulled a code 12....
> JakeandReggie@aol.com wrote:
> : Never got a 55. I waited for a couple minutes, no change from 12. I
pressed
> : the trip button, no change. I tried the sequence all over again and even
> : doing one more quick off-on after I looked at 12 for a while, nada. Is
it bad
> : that I'm not seeing 55 to end my codes? I'll try what you suggested and
see
> : how things turn out. Thanks Frank...
>
> Yep, the last code you should get is 55. A 12 won't turn on the check
> engine light, so there must be at least one other code in there (in
> addition to the 55). I don't have a '97 but after you see the first code,
> quickly turning the key off then on again is supposed to bring up the
> next one. Maybe you'll just need to play with it a bit until you get
> the timing down.
>
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------ jon@dakota-truck.net or
jon@jonsteiger.com -----.
> | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL
|
> | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly
|
> `-----------------------------------------
http://www.jonsteiger.com ----'
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:22 EDT