Re: Broken bolts in exhaust manifold....

From: MJ Inginson (mjingison@home.com)
Date: Sun Aug 19 2001 - 17:03:29 EDT


Bolt extractor (or called an easy-out). Your going to have to drill a small
diameter hole into the bolt. The easy out then threads itself into that
hole by turning counter clockwise. This makes the easy out dig in more as
the bolt is extracted.
Mike I.
95CC 4x4 v6
----- Original Message -----
From: "Wes Weems" <wweems@fix.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, August 19, 2001 14:23
Subject: DML: Broken bolts in exhaust manifold....

> Ok....
>
> I found on one side of my engine there was a bold missing out of my exaust
> manifold... and whne I tried to put one in.. .the hole was already
> plugged... upon trying to take other bolts out... I found out that the
first
> one was broke off and the second one broke whne trying to pull it
out..(with
> very little strength)
>
> I guess my question is this... since the bold broke approx 2-3mm inside
the
> hole... how the heck do I get the bolt out? Drill it out and re-thread?
And
> ideas for getting em out with out all that... and I am going to want to
put
> some bolts back in that can withstand heat better or whatever... that one
> thta broke on me was super weak...
>
>
> Wes
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:28 EDT