Jay, you must remove the stock studs to use these, and they'll fit wires up
to 8mm (8.5 MSDs will fit, albeit tight). I have no problems with
leakage, although you may or may not have to retighten the looms once
installed.
I'll try to take some pics when I install the replacements, you'll need to
cut a small slit in part of the loom to clear the lip on the stock valve
covers. (or use a hold down tab to fill the gap of the lip...)
__________________
Jon Smith
Raleigh, NC
'95 CC 318 4x4 auto
344rwhp/424tq
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:31 EDT