You could do what I did and buy some grommets and drill your own hole. Mines
in the glove box and I drilled a new hole straight back and as high as I
could, I have about 18" extra wire doing it this way.
Sam South
ET 13.61,MPH 104.45
95 Dak, 5.9L,3.90 LSD,5-speed
http://people.mw.mediaone.net/sawcut64/home.html
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
----- Original Message -----
From: "Kevin (MAGNUM S/T) Hoegen" <kevinhoegen@email.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Friday, August 24, 2001 8:57 AM
Subject: DML: IAT adjuster...for those who HAVE installed it...
> It seems that the wire harness may be a bit short based on what I have
read.
> Could someone who has installed the IAT adjuster tell me how they solved
> this problem? Did you have to purchase xtra wiring??
>
> I am thinking of having the control box located in the glove box or
possibly
> inside the ash tray.
>
> I have the IAT adjuster still in the box and expect to install it next
week
> as soon as I get the truck back from the dealership (with the new
> Centerforce II assembly courtesy of SpeedTweaks :-) I'd like to know in
> advance if I am going to need additional materials prior to installing it.
>
> Thanks,
> Kevin
> http://webpages.charter.net/khoegen
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:33 EDT