Re: 360 swap checklist

From: Mark Kuzia (flyboy01@mediaone.net)
Date: Mon Aug 27 2001 - 18:35:57 EDT


>perfect sealant no.5 or it's equivalent.

Black or blue RTV.

> Mopar 1.6 roller rockers with new pushrods and guide plates

Don't forget to loctite the studs in a day before.

> Headers

Don't forget that you will need two new bolts per side because the 318 uses
studs.

> Mopar oil pump, pickup tube, and distributor drive gear

Did you get an oil pump priming shaft? Spin it with a drill until you see
oil coming out of the rocker arms and bubbles stop, you may need a bucket
and 2-3 quarts to do this.

> All of this and a window of 4.5 days to complete the job.
>
>
> --Mike
> www.mikesdakota.com

Plenty of time.

Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)

----- Original Message -----
From: "Michael Clark" <mike@mikesdakota.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, August 27, 2001 4:55 PM
Subject: DML: 360 swap checklist

>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:36 EDT