Hehehe...it doesn't come off your hands, or any other exposed skin at all.
It goes when the skin wears off. I still have a few dots of it on my
eyeglasses from the first frame I did 3 years ago...
Definitely follow the instructions to the letter and prep any bare,
non-rusty metal (I suggest scuffing it up as well as the Metal Ready or
similar etching solution).
-Rodney
> -----Original Message-----
> From: George T. Geissinger [mailto:ustow@ptd.net]
> Sent: Tuesday, August 28, 2001 12:00 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Re: RE: POR15
>
>
> Use the foam throw away brushes and rollers and rubber
> gloves. it doesn't
> come off your hands well.
> GEORGE!!
> ----- Original Message -----
> From: "Kevin (MAGNUM S/T) Hoegen" <kevinhoegen@email.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Tuesday, August 28, 2001 12:14 PM
> Subject: DML: Re: RE: POR15
>
>
> > Thanx man...thats alot less than I would have imagined.
> >
> > Any tips on do and don't during application (other than
> what is posted at
> > the site). Did you run into any problems or surprises
> during application?
> >
> > TIA
> > Kevin
> >
> >
> > "Rodney Lewis" <rlewis@nicorenergy.com> wrote in message
> > news:394A61F0540FD51185600060CF205F6930E605@SERVER-E-NE-IL...
> > > I did a CJ-7 frame and misc parts with it and a Scrambler
> frame. 1 quart
> > > would probably be plenty, definitely no more than 2 quarts.
> > >
> > > -Rodney
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:36 EDT