What type of cam you running? (Sounds like an offroad/RV cam with that
high of a vacuum signal at idle).
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Doug Myers
Sent: Saturday, October 13, 2001 7:06 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: MAP sensor
Hey guys,
With all this talk about MAP sensors reading 11-13" at idle, I'm
wondering something. Since I put my 360 together, it has constantly read
16-18" of vacuum from the MAP sensor, and its hooked to the TB, not the
manifold. I was shocked when I first saw that. Is that odd? I haven't
taken a direct manifold reading yet, but I imagine its somewhere around
20-22".
Doug Myers
-------------
'99 Dakota RC/SB 5.9L/5-speed/3.92SG
K&N Gen II FIPK, Comp Cams '604 cam, Progear timing chain, MP 2-bbl MPI,
MP R/T heads, Hughes' roller rockers, MP polished aluminum valve covers,
ASP crank pulley, MP Headers, 3" Dynomax cat, 3" Flowmaster, Accel
Supercoil, Magnecor KV-85 8.5mm Race Wires, Melling HV oil pump,
Centerforce Dual Friction Clutch
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:16 EDT