Could anyone explain what magnafluxing is? I've heard the term before but
I'm not really sure what it is.
Thanks Geoff
""Aaron Gasparich"" <acg302@ptd.net> wrote in message
news:001501c155df$4f3313e0$4037e518@msns.eph.ptd.net...
> my crank and rods are fine, just got it all back fromt he machine shop, i
> had it all magnafluxed and balanced and had the shop put in new bearings
> and rings, shop said its be good for 7 plus
> ----- Original Message -----
> From: "Geoff" <geoff_fahl_1@yahoo.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Monday, October 15, 2001 7:23 PM
> Subject: DML: Re: Re: Re: 318 swap info
>
>
> > Are you replacing your crank or rods either? There's 60k on my engine
so
> > I'm worried that it'd blow turning 6000 rpms. My internals appear in
good
> > condition but I'm taking it to a machine shop for a thourough inspection
> >
> > Geoff
> > ""Aaron Gasparich"" <acg302@ptd.net> wrote in message
> > news:007601c15522$68d4a560$4037e518@msns.eph.ptd.net...
> > > I"m plannign on spinning the 318 i'm building to 6200. I'm getting my
> cam
> > > and heads from hughes engines. www.hugesengines.com. I'm gonna get
full
> > > lenght headers from summit. the mp single plane 2bbl intake from the
> mopar
> > > dealer and the mp pcm there too. The hp pcm doesnt have a rev limiter,
> so
> > i
> > > can freely spinn up to 6200 I'm not gonna get new pistons, but you can
> get
> > > pistons, bearing, rings, etc from mancini racing
> > > http://www.manciniracing.com I like the 318 a little better than the
> 360
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:18 EDT