Remove the Hyper PCM..
----- Original Message -----
From: "Ken Allgood" <kenallgood@home.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Thursday, November 01, 2001 5:33 PM
Subject: DML: PINGING - Still exists, need help
> Ok, so I installed Autolite 3923's over this weekend.. Noticed a
> significant increase HP with the butt dyno, and reduced my pinging, but
> alast, it's still there... suggestions?? Current mods include:
>
> Quick-D K&N intake
> Gibson Catback
> Hypertech PCM
> 180 Tstat
> Autolite 3923's (gapped at .040)
>
> Currently running 93 octane.. I have run with octane boost with the 93
> octane (before putting in the autolites), which just about completely
> eliminated the pinging.. running the 93 octane w/octane boost and
autolite
> 3923's might do the trick (haven't tried yet), but with burning thru 20
> gallons/week in gas, that gets to be expensive..... any other
suggestions
> so I don't need to use the extra octane boost?
>
> Ken Allgood
> 97 CC SLT 5.2L
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:27 EDT