can i make a suggestion my fan settings where going out on my 95 it wasnt
the resister it was the fan switch if you where to pull this unit out theres
a metel plate on the back mine was melted where it got to hot //ronnie
----- Original Message -----
From: "Car37" <englehart@Sympatico.ca>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Friday, November 02, 2001 9:05 PM
Subject: DML: Blower fan
> I think I read that the blower fan resistors go on some of the Daks.
> Mine is a 96 V8 and and I am losing my settings, think I only have the
> second position left. I noticed the plug has also melted, is this a
> normal thing? I finally got to drive her since August, got the
> transmission in but have to figure out this metal filing thing out. I
> also put a 2in body lift on it during the other half of the summer
> before the tranny. I got the gear selectors lengthened, do not know if
> the added enough to the 4X4 lever and they added to much to the 5speed
> shifter and that is into the dash and I have a hard time to reach it in
> 5th. Gotta get that straightened out soon.
>
> Anyways, is this a resistor unit and is it expensive? Thanks
>
> --
>
> Shawn Englehart
> return email: englehart@sympatico.ca
> www.geocities.com/englehrt
> http://www.dakota-truck.net/profiles/dakota/Yfz3JVR3VIJnE/profile.htm
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:27 EDT