At 09:55 AM 11/6/01 -0500, you wrote:
>Tim wrote:
> > Possible. The mechanic noticed that the PCM pulls a lot of timing out
> > during acceleration. Maybe too much, but with my compression I'd
> > rather be on the safe side as far as that goes.
>Its the converter... Mine did the same thing... put a stock converter in
>it... my 60' with a 2400 stall was 2.2-2.4's and now with the stock one,
>its 2.0-2.1s... I'm sure you're "bogging" off the line, as was I...
>Tim Berry
If the converter is a factor, then it must depend on the maker.
I'm running an SMR 3000 (flash) converter and I'm not experiencing
any bogging.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:28 EDT