> >I wonder if the OBD-II computer may be holding you back a little. If I
were
>
> Possible. The mechanic noticed that the PCM pulls a lot of timing out
> during acceleration. Maybe too much, but with my compression I'd
> rather be on the safe side as far as that goes.
Its the converter... Mine did the same thing... put a stock converter in
it... my 60' with a 2400 stall was 2.2-2.4's and now with the stock one,
its 2.0-2.1s... I'm sure you're "bogging" off the line, as was I...
Tim Berry
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:28 EDT