At 04:01 PM 11/26/01 -0800, you wrote:
>One thing, Dont touch bulbs with fingers, if you do touch then wipe with
>soft clean cloth or use denatured alcohol on clean cloth. the oils can burn
>bulb out, also you may want to install a new relay, yours could be sending
>to much voltage causing a burn out..
>----- Original Message -----
>From: "John C. Worden" <scirocco@powerlink.net>
>To: <dakota-truck@buffnet.net>
>Sent: Sunday, November 25, 2001 4:27 PM
>Subject: DML: Anyone else's Gen III Dak blow foglamp bulbs?
Yeah, I never touch the bulbs. But the relay is a new one, never thought
to check if there was a relay for them. I'll check that today.
Unrelated to the foglamps; the Dak goes in tomorrow morning to get the
trans. totally flushed out. Maybe that will prolong what I believe to
currently
be a very short life span. The shop that does it has had some great results
from this machine they got to flush transmissions.
John
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:35 EDT