I don't see an EGR port in either of my TB's (92 v8 or the 95 v6)
The EGR tube on both engines goes to the back of the intake manifold I
think.
Geoff
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:001201c17863$ea138dd0$040aa8c0@homenet.com...
> You'll have to replace it as well. Not to forget, the 95 and older
> models have the EGR ports in the TB bores (you'll need those as well).
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Geoff
> Sent: Thursday, November 29, 2001 4:49 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: RE: TB's and throttle cable.
>
>
> Someone just emailed me and said that they have a 97 v8 tb. Would that
> work with my existing cable or will I have to replace it anyways?
>
> Thanks again
> Geoff
>
>
> ""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
> news:000001c17843$c20194b0$040aa8c0@homenet.com...
> > All you need to do is swap the linkage and cable.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@BUFFNET.NET
> > [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Geoff
> > Sent: Thursday, November 29, 2001 1:10 PM
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: DML: TB's and throttle cable.
> >
> >
> > Hi
> > I was just looking at the tb for my 5.2 which came from a 92 Dak
> > and it uses a different style of throttle linkage than my 95 v6 does.
>
> > I don't see any way that the 5.2 tb will hook up to my throtle cable.
>
> > Is there an engine swap kit out there that would help me with this, or
>
> > do I have to buy a TB for a 95 5.2. Could just an old throtle cable
> > from the same year as my v8 work?
> >
> > Thanks
> > Geoff
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:35 EDT