That's exactly what the problem was. Need child sized hands to get to the
back of the valance openings with the HD cooling options my truck has.
Once I figured out which bolts, it was off in 10 minutes.
TonyC
-----Original Message-----
From: Will Coughlin <willcoughlin2@hotmail.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Sunday, December 02, 2001 9:33 PM
Subject: Re: DML: How to remove bumper/lower fascia on Gen III
>Tony, I was able to install mine without removing the valence. I had no
>problem doing it with the valence in place. But, I assume you have an
>auxilary automatic transmission cooler that's in the way on your R/T,
right?
>I don't have that cooler on my 5-spd truck.
>
>Will Coughlin willcoughlin@hotmail.com
>'00 Reg. cab 2wd, 4.7L/NV3500HD/9.25" 3.92 sure-grip
>
>
>
>----Original Message Follows----
>From: "TonyC" <acellan1@tampabay.rr.com>
>Subject: DML: How to remove bumper/lower fascia on Gen III
>Date: Sun, 2 Dec 2001 10:25:32 -0500
>
>I was going to install the Speed Grill inserts on my lower valance today.
>What's the easiest way to remove the lower fascia.
>Basically where are the bolts located?
>
>TonyC
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:39 EDT