Front bearing, huh? Haven't heard of that blowing with out abuse. Usually
it's the synchros or bent shift forks that require attention.
Will Coughlin willcoughlin@hotmail.com
'00 Reg. cab 2wd, 4.7L/NV3500HD/9.25" 3.92 sure-grip
----Original Message Follows----
From: Car37 <englehart@Sympatico.ca>
Subject: Re: DML: Englehart- Transmission??
Date: Tue, 11 Dec 2001 11:24:24 -0500
Yes, that is the set up I have. The vapor can was my fault, not paying
attention to tying up the lines when putting things back together. The
lines melted on the exhaust. I have 117 000Km on it now and had it fixed
about 2000Km ago so about 70 000miles. The front bearing shattered for an
unknown reason, I had the oil changed in thranny last year, about 20 to 30
000 Km ago. I did not do any major pulling of offroading. This bearing is
behind a little plate in the bell housing just after the clutch. The
machanic said there was nothing else wrong with it, just the bearing went.
I have the 96 318, NV3500 5sp with
4X4.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:40 EDT