sorry I don't have any advice but would like to see some pics!
Tim Althoff
http://go.to/yllwdkta
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Chris Ryan
Sent: Tuesday, December 18, 2001 1:19 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Backspacing for 33s w/lift.
I have a 99 with a 3" suspension lift and now I've just done a 3" body
lift. I put 33x12.5 MTs on the stock rims and have a little rubbing at
the front frame rail at full lock. So now I have to figure out the right
backspacing to bring the wheel out just enough to keep the tire off the
frame but not too much. I'm looking at a set with a -18mm backspacing,
which I think is good but might need a little more.
Does anyone have any experience here? Any input would be appreciated.
Chris
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:42 EDT