Hey John,
Use the new car wash on Howard lane. It's still FREE right now (one
quarter and drop it through the slot about 10 times). It does an
incredible job on the wash/condition/wax process. :) (Use the hand
wash bays.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of John Neff
Sent: Wednesday, January 09, 2002 9:19 AM
To: DML
Subject: Re: DML: Lift Kit and Tire Question...
I'm running 33X10.5X15 without a lift and the only rubbing I have is on
the front frame rails. If I take it off road, they will rub the body a
bit when compressed, but for street use, they don't rub.
I'm still working on getting the time to wash the truck so I can take
pictures.
John
>I installed a 2-inch body lift on my '98 and put 32's on like what
>you're planning. The overall diameter of the tire is not the primary
>concern (up to a point obviously), but the width. My 32 x 11.5's rub at
>full lock on the frame rails (no rubbing on the body). 33's would
>work, but I don't think you'd want to go with the 12.5" width without
>getting new rims with a better backspacing. If you could special order
>33x11.5's or similiar odd size (note they will probably be more money),
>then you could go bigger without new rims.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:48 EDT