Actually I'm not sure if the Ram came with the NV3500 or not, I do know that
I bought a used Magnum 360 flywheel and it works fine with my Dak NV3500. So
I assume then that the 3500 and 4500 use the same flywheel. As far as how
strong they are, Mark Kuzia has used the NV3500 with his 360 for 60,000
miles and it already had 90,000 from the 318 before, mine had 114,000 miles
with the 318 and now 4,500 with the 360. There has probably been well over
200 1/4 mile passes on both of these transmissions with only one failure,
and that was from a power shift and not the 360's power.
Sam South
ET 13.61 MPH 105.88
'95 Dak RC, 5.9L,5-speed,390 LSD
http://people.mw.mediaone.net/sawcut64/home.html
http://www.dakota-truck.net/profiles/dakota/Mt5J8FaDfVCv6/profile.htm
----- Original Message -----
From: "Sam South" <sawcut64@mediaone.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Sunday, January 13, 2002 8:11 AM
Subject: DML: Re: flywheel for 360 swap??
> Yes Rams came with the 360/NV3500 combo, that's how I got the flywheel for
> my swap. Expect used prices of around $200.00 and new prices, if I
remember
> correctly, of around $500.00(?).
> Sam South
> sawcut64@mediaone.net
> '95 Dak RC,5.9L, 3.90 LSD, 5-speed
> http://people.mw.mediaone.net/sawcut64/home.html
>
> ----- Original Message -----
> From: "Rob" <dakota99@shaw.ca>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Saturday, January 12, 2002 10:54 PM
> Subject: DML: flywheel for 360 swap??
>
>
> > I've got a friend w/ a '98 Dakota manual trans. He wants to convert to
a
> > 360 and keep the manual transmission. He wants to know what to do for
the
> > flywheel - did any of the Rams have a 360/manual, and if so - could they
> > provide info to take to the dealership? (ie: vin#, trans. type, etc)
> >
> > thanks
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:49 EDT