Well I unbolted it, and the changer I've got is about a quarter inch to
wide to work. I was planning on having the door face the back so I'd
slide the cartridge in from behind the seat. But that's a mute point
now. Guess its going in the console.
-----Original Message-----
From: Andy Levy [mailto:andylevy@yahoo.com]
Sent: Sunday, January 20, 2002 9:14 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Upgraded My Dak
That, and you need room to swap cartridges, and there's no way you can
do
it from the front of the seat.
Esler, Joel SGT wrote:
> It will fit physically, but You can't slide the chair.
>
> Joel
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Kenneth M.
Berntsen
> Sent: Saturday, January 19, 2002 4:55 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Upgraded My Dak
>
>
> Well I've just upgraded my 96 Dak to a 2002 QuadCab 4x4 that I bought
> from my neighbor. Its got the 5.9 and I'm wanting to put a new
exhaust
> on it. Any one have suggestions on what works good for the 5.9? I
want
> some what of a mellow tone, similar to what I got form the 3 chamber
> flowmaster I had on the old truck.
>
> Also has any one ever tried placing a CD Changer under the passenger
> seat in their Dak? I've got a pioneer 12 disk that I think will fit
if
> I unbolt the the seat to install it.
-- -andy andylevy@yahoo.com Maintainer, DML FAQ - http://www.dakota-truck.net/faq/ http://home.twcny.rr.com/andylevy/dakota/ '99 CC 4x4 318 auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT