Mark,
It should be right at 2.9" (+/- a "bit") ;)
I use a 2.40" pulley. (Wheeeeeeeeeeeeeeeeee)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Mark Kuzia
Sent: Monday, January 21, 2002 9:35 PM
To: dakota-truck@buffnet.net
Subject: DML: Yet another Powerdyne question!
Does anyone know the stock size of the pulley that comes with the
1996-2000 Dakota Powerdyne supercharger kit. Is it a 2.70, 2.93, or 3.12
Ratio pulley? I have a chance to buy one real cheap and I don't need two
of the same.
Mark Kuzia
flyboy01@mediaone.net http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT