Re: RE: RE: RE: RE: Hyper Speed Controller - Working and noticeably better already

From: sam morgan (sinous1@hotmail.com)
Date: Wed Jan 23 2002 - 22:53:11 EST


Will this box also control the timing?

>From: "Bernd D. Ratsch" <bernd@texas.net>
>Reply-To: dakota-truck@BUFFNET.NET
>To: dakota-truck@BUFFNET.NET
>Subject: DML: RE: RE: RE: RE: Hyper Speed Controller - Working and
>noticeably better already
>Date: Wed, 23 Jan 2002 19:51:07 -0600
>
>
>Initial pricing was set at $399 (Retail) but with the new design
>(Programmable), it'll be more.
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tim Althoff
>Sent: Wednesday, January 23, 2002 10:33 PM
>To: dakota-truck@BUFFNET.NET
>Subject: DML: RE: RE: RE: Hyper Speed Controller - Working and
>noticeably better already
>
>
>what no price... ;)
>come on just say "very roughly $$$"
>
>
>Tim Althoff
>99 RC Dak w/ V6 5-speed
>http://go.to/yllwdkta
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
>Sent: Wednesday, January 23, 2002 5:15 PM
>To: dakota-truck@BUFFNET.NET
>Subject: DML: RE: RE: Hyper Speed Controller - Working and noticeably
>better already
>
>
>Actually, it's for just about any vehicle with an O2 sensor (or two).
>
>It monitors the O2 signal (we'll use A/F for ease of understanding) and
>corrects it to 14.7:1 under normal cruise and 12.0:1 under WOT (WOT is
>adjustable +/-1.0).
>
>Again, the final product will be ready in 90 days (this is the one with
>the USB port).
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tim Althoff
>Sent: Wednesday, January 23, 2002 10:01 PM
>To: dakota-truck@BUFFNET.NET
>Subject: DML: RE: Hyper Speed Controller - Working and noticeably better
>already
>
>
>ok bernd...I need to take out a little stress (I am supposed to have my
>Computer science program done by Friday at 5pm and have almost
>nothing...I NEED TO BUY SOME NEW TOYS!!!
>
>is this for highly modded or could I get some results from my lightly
>modded 3.9. (cold air, TB, ignition, exhaust, 180*, modified intake,
>locker...soon to be 3.90 gears, elec fan, pulley. How do you adjust it?
>I know laptop but how adjustable is it?
>
>most importantly what cost going to look like? thanks
>
>Tim Althoff
>99 RC Dak w/ V6 5-speed
>http://go.to/yllwdkta
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
>Sent: Wednesday, January 23, 2002 4:26 PM
>To: Dakotart@yahoogroups.com
>Subject: DML: HyperSpeed Controller - Working and noticeably better
>already
>
>
>
>Yup...the HyperSpeed Controller (Proto-Type Rev-II) is installed and
>functioning as claimed. Much better throttle response, no overly rich
>(or lean) smell from the tailpipe (home-brew A/F meter...aka: nose), and
>the kicker is the lean spot caused by the supercharger at 1-2# boost
>under 1/2-3/4 throttle...it's not there anymore.
>
>It took about 50 miles for the PCM to relearn the new (corrected)
>settings from the HyperSpeed controller (reset the PCM after the initial
>installation) and adjusted the high-end enrichment a little bit (will
>need to put back to normal in about 50 more miles or so).
>
>The final box will be released in 90 days with a USB port, completely
>sealed box (for under the hood installation), and software for your
>laptop. This will allow the end user to fine-tune the fuel curve
>(across the RPM band in small increment as well)...this means
>programmable and automatic. Yes..you can adjust on the fly (while
>driving).
>
>I put some pictures of the Proto-Type installation on the SpeedTweaks
>website (Engine Controls/HyperSpeed) but keep in mind that the final
>controller will be Plug and Play with your factory O2 sensor(s).
>Yes...it replaces your stock (forward) O2 sensor(s). With all this
>said, it's also 100% SMOG LEGAL (CARB EO#).
>
>I'll be heading to the Dyno shop this Friday to get some HP and TQ
>readings, but the butt-dyno already noticed the change...nothing else
>was installed in the mean time.
>
>- Bernd
>
>
>

_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT