FOG LAMPS ON WITH HIGH BEAMS This is a fairly simple, 5 minute procedure.
First, you must remove the black plastic dash frame.It just snaps out. Then,
remove the 3 screws holding the headlight switch in and remove the switch.
There are 2 connectors on the back of the switch.. A 2-wire connector and a
multi-wire connector. The 2 wire connector has a BLACK and a BLACK with GREEN
STRIPE wire. Run a jumper from the BLACK with GREEN STRIPE wire in the 2 wire
connector to the LIGHT BLUE with BLACK stripe wire on the multi-wire
connector. That's it! Your fog lights will come on when you turn them on
(parking lamps must be on, at least) and will stay on with low or high beams.
SEMIHEMI01@AOL.COM> KB SuperCharged, 4.7L, 2001, QC,
<A HREF="http://hometown.aol.com/semihemi01">the "DAK",</A> <A
HREF="http://SouthernMopar.org">Southern Mopar</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT