John,
I just pulled up the MOPAR Performance Parts website. The gaskets they show
are the Mr. Gasket "Ultra-Seal" set. My last set ran around $18 from
Summit. Hope this helps ya' out.
Rich
-----Original Message-----
From: John_Neff@Dell.com [mailto:John_Neff@Dell.com]
Sent: Monday, January 28, 2002 11:49 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: Header gaskets
Rich,
I've heard these are the same gaskets as the Mopar gaskets. Have you heard
this to be true too?
Thanks,
John
>John,
Ultra-Seal gaskets by Mr. Gasket work excellent! They will seal themselves
to the mating surfaces between the block and headers, and will not leak.
(Unless your header flange is severely warped, or has been mis-ground.) If
you have a 318, the part number is 5949. Sorry, I don't know the part
number for the 238. Rich - Ashburn ,VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:52 EDT