I spray WD-40 on mine..
----- Original Message -----
From: Mallett, Donald B <Donald.Mallett@BNSF.com>
To: 'DML' <dakota-truck@buffnet.net>
Sent: Monday, February 25, 2002 10:10 PM
Subject: DML: Re: Did some work today on the Dak!
> Is there something that I can put on the O-rings to help slide the
sparkplug
> coil in to position on the plugs? Think that the O-rings are getting
chewed
> up from sliding against the bare metal in the holes.
>
> --
> *------------------------------Y2KOTA------------------------------*
> Don Mallett
> Y2K QC 4.7L Auto SLT+
> http://Geocities.com/maldbnsf/
> http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm
> *------------------@ RR X-ings, ³LOOK LISTEN LIVE²-----------------*
>
>
>
>
>
> - ----- Original Message -----
> Date: Mon, 25 Feb 2002 15:33:09 -0800
> From: "Kevin Reimer" <kwreimer@msn.com>
> Subject: DML: Re: Did some work today on the Dak!
>
> Oh how I love Wal-Mart. The O-rings can be found at a Lowes hardware
store
> in the bulk section, very cheap in prices, the Dealer will rob ya blind,
the
> O-rings may be a little fater in diameter but this will seal tighter..
Just
> remove one and take it with you to the Lowes..
> Date: Mon, 25 Feb 2002 15:33:09 -0800
> From: "Kevin Reimer" <kwreimer@msn.com>
> Subject: DML: Re: Did some work today on the Dak!
>
> Oh how I love Wal-Mart. The O-rings can be found at a Lowes hardware
store
> in the bulk section, very cheap in prices, the Dealer will rob ya blind,
the
> O-rings may be a little fater in diameter but this will seal tighter..
Just
> remove one and take it with you to the Lowes..
> - ----- Original Message -----
>
> *---------------------------------------------------------------*
> Donald Mallett
> 817 847-9497 Office
> 817 791-7052 Cell
> *--------------You have no rights if you don't know your
> rights...-------------*
> http://www.prepaidlegal.com/go/mallett
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:02 EDT