Is there something that I can put on the O-rings to help slide the sparkplug
coil in to position on the plugs? Think that the O-rings are getting chewed
up from sliding against the bare metal in the holes.
-- *------------------------------Y2KOTA------------------------------* Don Mallett Y2K QC 4.7L Auto SLT+ http://Geocities.com/maldbnsf/ http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm *------------------@ RR X-ings, ³LOOK LISTEN LIVE²-----------------*- ----- Original Message ----- Date: Mon, 25 Feb 2002 15:33:09 -0800 From: "Kevin Reimer" <kwreimer@msn.com> Subject: DML: Re: Did some work today on the Dak!
Oh how I love Wal-Mart. The O-rings can be found at a Lowes hardware store in the bulk section, very cheap in prices, the Dealer will rob ya blind, the O-rings may be a little fater in diameter but this will seal tighter.. Just remove one and take it with you to the Lowes.. Date: Mon, 25 Feb 2002 15:33:09 -0800 From: "Kevin Reimer" <kwreimer@msn.com> Subject: DML: Re: Did some work today on the Dak!
Oh how I love Wal-Mart. The O-rings can be found at a Lowes hardware store in the bulk section, very cheap in prices, the Dealer will rob ya blind, the O-rings may be a little fater in diameter but this will seal tighter.. Just remove one and take it with you to the Lowes.. - ----- Original Message -----
*---------------------------------------------------------------* Donald Mallett 817 847-9497 Office 817 791-7052 Cell *--------------You have no rights if you don't know your rights...-------------* http://www.prepaidlegal.com/go/mallett
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:02 EDT