Re: RE: Re: 2.02 valves on 5.2 motor

From: Gmblows@aol.com
Date: Sat Mar 16 2002 - 22:59:40 EST


I would not take valve to cylinder clearance for granted.
The 318 does have a smaller bore than it's bigger brothers.
I've heard that 2.02's will not fit in a 273, and given the
ridiculous tolerances for production motors it's not a
given that they will clear in all cases.

> I pretty much agree with this statement except I'd try notching the pistons
> if required. I think you'll find that works better. :'B
> Rich - Ashburn, VA
>
>
>
> will work, but you may have to notch the cylinders for clearance.
> TonyC



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:09 EDT