I pretty much agree with this statement except I'd try notching the pistons
if required. I think you'll find that works better. :'B
Rich - Ashburn, VA
-----Original Message-----
From: TonyC [mailto:acellan1@tampabay.rr.com]
Sent: Saturday, March 16, 2002 8:00 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: 2.02 valves on 5.2 motor
will work, but you may have to notch the cylinders for clearance.
TonyC
-----Original Message-----
From: Pukeloser@aol.com <Pukeloser@aol.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Saturday, March 16, 2002 7:32 PM
Subject: DML: 2.02 valves on 5.2 motor
>
>Does anyone have any experience with putting heads with 2.02 intake valves
on
>a 318?
>I am doing a stroker motor project and will want the R/T heads with 2.02
>intake valves fo the 408 motor but was wondering id they would work ok on
my
>318 'til the stroker is done. Some say that I'll lose low end response but
>I'm hoping that the top end power will make up for it.
>
>John S
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:09 EDT