Re: gen 2 side mirror replacement

From: Mike Meyerhoff (mike@mypants.org)
Date: Sat Mar 23 2002 - 22:30:37 EST


Its an easy DIY project.
Pull the door panel. Three screws are then accessable which hold the mirror
inplace. The mirror motor wires have a quick connect connector right there,
so you just pull and replace. Do be picky about the "stuffing" in the
opening. It provides waterproofing, sound-deading so if you don't put it
back right you might get some extra road noise.

mm

-----Original Message-----
From: Pukeloser@aol.com <Pukeloser@aol.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Saturday, March 23, 2002 8:19 PM
Subject: DML: gen 2 side mirror replacement

>
>Hey all,
>
> I went out to my truck this morning (I was parked on the street) and
>somebody had hit my drivers side mirror and smashed it to pieces. Does
anyone
>know how difficult it is to replace a 6x9 power mirror on a 95 dak?
> I remember lokking the door guts a while back but cant remember if I
>thought it would be easy to deal with or hard to deal with.
> The power action still works but the glass is shattered and part of the
>crome covering is busted. I guess I could just glue a new mirror in there
>seeing as how the truck is beat up anyway.
>
>John S



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:12 EDT