I've always run 32 front and 29 back in my RCs. Unless going on a long
highway trip or hauling weight of any consequence. It keeps the rear in
contact with the ground better.
TonyC
-----Original Message-----
From: B1LLYW@aol.com <B1LLYW@aol.com>
To: dml@dakota-truck.net <dml@dakota-truck.net>
Date: Monday, April 01, 2002 1:00 PM
Subject: DML: Tire Pressures
>
>I was just wondering what others are running. My owner's manual says 32
psi
>front and 30 rear, and that seems low to me. I had mine up to 40 psi front
>and rear and it rode fine and basically handled well, although the rear was
a
>little jumpy. So, I dropped it down to 35 psi all around and that just
feels
>too low.
>
>Bill White - www.moparforme.com
>'02 Quad Cab 4x4, SLT+, 4.7, 5 speed, 3.92's, Airaid, MBRP Super Single
>Exhaust
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:18 EDT