What Dak is this for...Gen III, 4.7?? I am curious if you plan to do
anything to the stock airhat.
""Rick Barnes"" <barnesrv@attbi.com> wrote in message
news:000801c1e61b$f8e139e0$53a06218@attbi.com...
>
> "Y" not? Its worth a tr"y"
>
> sorry, couldn't resist...
>
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Moody, Scott J
> Sent: Wednesday, April 17, 2002 9:30 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: DML: New idea for intake
>
>
>
> While I was in Home Depot shopping for parts for my intake, I had an idea.
I
> looked for a PVC "T" or "Y" that was suitable for a dual-inlet intake. I
> didn't see one that I thought would work well so I brainstormed that I
could
> take 2 90* bends (long radius) and siamese them together. I would band-saw
> them, starting at where they would fit to the TB, cutting the opening
right
> in the middle, the saw line would run perpendicular to the opening. I
would
> then glue them together. I would run two 3" ducts to two K&N fliters. What
> do you guys think?
>
> Ascii art of the "Y":
>
> * *
> * *
> * *
> * *
> * *
> * *
> * *
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:22 EDT