Seems to get away from the cool air idea though, don't ya think
Bernd?..unless there was a way to extend those tubes forward
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000f01c1e674$f5c55670$090aa8c0@homenet.com...
>
> Scott,
>
> Sounds like a good idea but check this out:
>
> http://www.turbocity.com/JeepDualAirFilter.htm
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Moody, Scott J
> Sent: Wednesday, April 17, 2002 7:30 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: DML: New idea for intake
>
>
>
> While I was in Home Depot shopping for parts for my intake, I had an
> idea. I looked for a PVC "T" or "Y" that was suitable for a dual-inlet
> intake. I didn't see one that I thought would work well so I
> brainstormed that I could take 2 90* bends (long radius) and siamese
> them together. I would band-saw them, starting at where they would fit
> to the TB, cutting the opening right in the middle, the saw line would
> run perpendicular to the opening. I would then glue them together. I
> would run two 3" ducts to two K&N fliters. What do you guys think?
>
> Ascii art of the "Y":
>
> * *
> * *
> * *
> * *
> * *
> * *
> * *
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:22 EDT