7mm Allen will get the caliper pins out.
TonyC
-----Original Message-----
From: Mike Turner <donkeydan69@hotmail.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Friday, April 26, 2002 1:00 AM
Subject: Re: DML: replacing brake rotors
>
>its really easy. take off the caliper, its held on w/ 2 torx bolts, not
>sure how they gauge size but it has a 40 on the bit, then 1 or 2 little
>retaining clip things on the lugs, they screw off. then just reverse the
>process of course and boom ur done. i just put new rotors on my parents
>durango and my r/t. the r/t got the powerslot pro stops though. hehe
>
>
>mike t of kingwood
>
>>From: Michael Clark <dml@mikesdakota.com>
>>Reply-To: dakota-truck@dakota-truck.net
>>To: dakota-truck@dakota-truck.net
>>Subject: DML: replacing brake rotors
>>Date: Thu, 25 Apr 2002 23:13:04 -0500
>>
>>
>>My parent's 4X4 durango needs to have new rotors. I
>>was wondering what's involved in doing a job like
>>this. Is it pretty much a DIY job?
>>
>>
>>--Mike
>>www.mikesdakota.com
>>
>
>
>
>
>_________________________________________________________________
>Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT