I agree with the tailpipe, BUT change out the muffler to a 3" in/ 3" out.
the stocker is 2.5/2.5. While your messing with the exhaust, install a 3"
cat, and use 3" tubing from it to the muffler.
TonyC
-----Original Message-----
From: taylor9565 <taylor9565@msn.com>
To: dml@dakota-truck.net <dml@dakota-truck.net>
Date: Thursday, May 16, 2002 1:47 PM
Subject: DML:RE: Tb's 50mm or 52mm
>
>Dave-
> I would not recommend changing the exhaust from the cat back just yet, I'd
>install the shaker hood, the 50mm TB, and then add the headers, these newer
>R/T's
>have pre-cats in the y-pipe with 4 O2 sensors and doing anything from
behind
>the cat is IMO a waste of time and money, the factory installs a decent
>muffler and 3" stainless tailpipe that looks and sounds good as is.A friend
>of mine installed a new catback on his R/T and it did ABSOLUTELY nothing
for
>the trucks performance or sound. He wishes he'd installed the headers
>instead, now he has to wait till he can come up with the cash for a set of
>JBA headers!
>Ron-
>2001 Dakota Sport R/C bright silver metallic
>e-mail: taylor9565@msn.com
>website: http://www.scsilverdak.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:33 EDT