I figured the intake was different (I'm not a technical guy at all)...but I
thought that maybe something of similar nature would work for you...glad you
found one anyway though...
Eric Jerman
Camp Lejeune, NC
98 Dakota Sport RC 3.9l 5 spd
http://www.angelfire.com/empire/dakon18s
----- Original Message -----
From: "crm" <tb.crm@verizon.net>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, May 24, 2002 12:51 AM
Subject: DML: RE: Re: Yes, another NUG...
>
> Eric,
>
> thanks for the link. the intake system for the 4.7 is a bit different
> though. however, i did find a pretty detailed page with one for the 4.7.
> here is the link for anyone interested:
>
> http://modernmusclecars.net/articles/coldair/
>
> -adam
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Eric Jerman
> Sent: Thursday, May 23, 2002 9:53 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: Yes, another NUG...
>
>
>
> Don't know if this is what you are looking for as far as an intake...but
> www.gibsdakota.com will give you the parts list for making your own...I
> used his info and made one for myself...cost only $50 as compared to
> $170 for an AIRAID and it does essentially the same thing...only it
> doesn't have the pretty sticker on it...check his page out and see if
> that will work for you...like I said I made one myself for my truck and
> I noticed a difference right off the bat...but I don't know if there is
> any difference between the intake needed for a 4.7 and a 3.9... I have a
> pic of mine as well on: http://www.angelfire.com/empire/dakon18s
> ----- Original Message -----
> From: "crm" <tb.crm@verizon.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Thursday, May 23, 2002 10:16 PM
> Subject: DML: Yes, another NUG...
>
>
> > Can anyone recommend a good link for a DIY cold air intake? Since K&N
> > hasn't released theirs for the 4.7, I figure I can fashion up
> > something, but would like some pointers and an idea of what I'll need
> > to buy. Or alternately, is there another manuf out there that has made
>
> > something decent for that engine?
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:36 EDT