The sensor should be back by the distributor, mounted straight up, and
threaded in the block. At least that was where they always put them on the
small-block Mopars and since the 3.9L is a shortened 318, I don't see why it
would be any different.
Take Care & Keep On Truckin'~~~~~John
<<'96 Dakota Sport 4x4, 3.9L 5spd>>
----- Original Message -----
From: "Stefan Bartels" <stebel@web.de>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, May 24, 2002 5:11 AM
Subject: DML: Oil lamp is always on
>
> Hi,
>
> the oil can light is alway on at a friends Dakota, although enough oil is
in the motor. The oil pressure sensor I have renewed without any success.
> I have bought a new sensor for the oil can light in the dash board, the
man at Dodge in Oklahoma told me, but I donīt know where the sensor is
located.
> I have forgotten to ask him for the location, but I didnīt thought I
wouldnīt find it.
> Nothing stands in the Haneys repair manual or elsewhere.
> Anybody knows the location?
> By the way it is a 1992 Dakota Sport V6 Magnum.
>
> Thanks for your help
> Stefan Bartels
> ________________________________________________________________
> Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr!
> Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:36 EDT