Thatīs right, that is the sensor for the oil pressure gauge. But where is the sensor for the oil lamp in the dash board?
Stefan Bartels
dakota-truck@dakota-truck.net schrieb am 24.05.02:
> The sensor should be back by the distributor, mounted straight up, and
> threaded in the block. At least that was where they always put them on the
> small-block Mopars and since the 3.9L is a shortened 318, I don't see why it
> would be any different.
> Take Care & Keep On Truckin'~~~~~John
> <<'96 Dakota Sport 4x4, 3.9L 5spd>>
> ----- Original Message -----
> From: "Stefan Bartels" <stebel@web.de>
> To: <dakota-truck@dakota-truck.net>
> Sent: Friday, May 24, 2002 5:11 AM
> Subject: DML: Oil lamp is always on
>
>
> >
> > Hi,
> >
> > the oil can light is alway on at a friends Dakota, although enough oil is
> in the motor. The oil pressure sensor I have renewed without any success.
> > I have bought a new sensor for the oil can light in the dash board, the
> man at Dodge in Oklahoma told me, but I donīt know where the sensor is
> located.
> > I have forgotten to ask him for the location, but I didnīt thought I
> wouldnīt find it.
> > Nothing stands in the Haneys repair manual or elsewhere.
> > Anybody knows the location?
> > By the way it is a 1992 Dakota Sport V6 Magnum.
> >
> > Thanks for your help
> > Stefan Bartels
> > ________________________________________________________________
> > Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr!
> > Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13
> >
>
>
________________________________________________________________
Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr!
Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:36 EDT