At 01:55 AM 5/29/02 +0000, you wrote:
>Iv heard some talk about clamping the front portion of the rear
>leaf springs and unclamping the back portion to launch better?
>Has anyone done this and do you have pictures and has your 60'
>dropped at all? Thanks Matt 99 CC R/T
Matt
If you're experiencing wheel hop due to axle wrap on the
burnouts or launches, rear spring clamps will help minimize
this a lot and will help with your 60' times. I have them
on mine (have not unclamped the back portion though)
and they have stopped wheel hop and sideway launches
for me. I have a 3000 (flash) stall converter so when I
launch it is with torque that I put out at around 3000 rpm.
HTH.
Bob Tom Burlington, Ont., Canada
'97 CC Dakota, 5.2L, 4x2, 44RE, 3.92SG, 4,075 lb (racing weight)
RW: 231.2 hp 340.0 torque PB: 14.313 95.05 mph
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:36 EDT