My bill says the part number is 82205259 Molding K 01-023-015.
May be different in the US though.
Rob S.
""Martin Nowak"" <got-speed@cox.net> wrote in message
news:ae5c00$chq$1@bent.twistedbits.net...
>
> Can you maybe supply the part # and I will check them out.
>
> Thanks,
> Marty
>
>
> ""Ronald Wong"" <ron-wong@cox.net> wrote in message
> news:NDBBIHDGKKJOIJDEOCBMCEHMFLAA.ron-wong@cox.net...
> >
> > I don't remember them costing that much. Try www.kollerdodge.com
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
> >
> > -----Original Message-----
> > From: owner-dakota-truck@dakota-truck.net
> > [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Martin Nowak
> > Sent: Sunday, June 09, 2002 8:40 PM
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: DML: Re: RE: fender flares
> >
> >
> >
> > As an added note,
> > about 3 weeks ago when at the dealership I inquired about them. I was
told
> > $260 for the set of 4. Allready factory painted to match.
> > Aftermarket will almost surly cost more, and IMO I think they stick out
> too
> > much. + the cost to paint them.
> >
> > Marty
> >
> >
> > ""Ronald Wong"" <ron-wong@cox.net> wrote in message
> > news:NDBBIHDGKKJOIJDEOCBMOEGLFLAA.ron-wong@cox.net...
> > >
> > > The Mopar ones work good. No difference between RT and non-RT. The
> Mopar
> > > ones are attached via pins, screws, and double sided tape. They are
> > ordered
> > > based on the color of your truck. That cost is included. There are
> some
> > > after-market ones that you have to paint.
> > >
> > > Ron
> > > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > > For modifications see my DML Profile (URL follows)
> > > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> > >
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@dakota-truck.net
> > > [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Eric
> > > Sent: Sunday, June 09, 2002 8:02 PM
> > > To: Dodge
> > > Subject: DML: fender flares
> > >
> > >
> > >
> > > Greetings.
> > > I'm considering adding some fender flares to my '99 Dak and need
some
> > > advise. First, is there any difference in the flares used on the
> "normal"
> > > Dak, as compared to the R/T version, and IF THERE IS, which would you
> > > recommend? Secondly, has anyone tried any aftermarket molded pieces?
> > > Last....is there any pointers I should be aware of as far as
> > > gasketing/seals/adhesives? Thanks a bunch.
> > >
> > > Eric Luce
> > > '99 Dak EC slt
> > > 2WD/ 5.2L/ Auto
> > >
> > >
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT