If, it is an '01 I can confirm the speedo cutting out. I was racing a guy
once on a 4-lane highway (totally safe, no one around for a couple of miles
and dead straight road) and I hit the rev limiter on my '01 QC and it was
either around 110 or 115. HTH.
Jeff Durling
'01 QC SLT+ 4.7 Loaded
----- Original Message -----
From: "crm" <tb.crm@verizon.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, June 29, 2002 11:26 PM
Subject: RE: DML: Dyno results - 4.7L QC Sleeper Project
>
> the guy running the dyno said something about 110 but i "corrected" him
> and said 98 cuz i thought it was 98. now, he was in the cab and in front
> of the speedo, so he mighta been right, and i hope he is. i'm going back
> in a couple weeks to run it again to test out the Fastman TB i just
> installed so i'll have them watch it really close. it will prolly cut
> out again in 3rd but i was getting good numbers so i dont mind :) and
> that way i'll know for sure what the speed limiter is. unless there is a
> rev limiter in 3rd gear???
>
> -adam
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Olznut@aol.com
> Sent: Saturday, June 29, 2002 9:51 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: Dyno results - 4.7L QC Sleeper Project
>
>
>
> What speed is it cutting out at??
>
> Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4
> "Silver
> Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be
> Finished
> By The End Of July!!
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:55 EDT