RE: Dyno results - 4.7L QC Sleeper Project

From: Ronald Wong (ron-wong@cox.net)
Date: Sun Jun 30 2002 - 00:40:21 EDT


You hit the speed limiter, not the rev limiter. The rev limiter stops you
from going beyond the PCM's expected redline, not necessarily the one that's
on your tach. I don't remember what the standard redline is for the 4.7's
with the standard PCM.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Jeff Durling
Sent: Saturday, June 29, 2002 8:58 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Dyno results - 4.7L QC Sleeper Project

If, it is an '01 I can confirm the speedo cutting out. I was racing a guy
once on a 4-lane highway (totally safe, no one around for a couple of miles
and dead straight road) and I hit the rev limiter on my '01 QC and it was
either around 110 or 115. HTH.

Jeff Durling
'01 QC SLT+ 4.7 Loaded
----- Original Message -----
From: "crm" <tb.crm@verizon.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, June 29, 2002 11:26 PM
Subject: RE: DML: Dyno results - 4.7L QC Sleeper Project

>
> the guy running the dyno said something about 110 but i "corrected" him
> and said 98 cuz i thought it was 98. now, he was in the cab and in front
> of the speedo, so he mighta been right, and i hope he is. i'm going back
> in a couple weeks to run it again to test out the Fastman TB i just
> installed so i'll have them watch it really close. it will prolly cut
> out again in 3rd but i was getting good numbers so i dont mind :) and
> that way i'll know for sure what the speed limiter is. unless there is a
> rev limiter in 3rd gear???
>
> -adam
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Olznut@aol.com
> Sent: Saturday, June 29, 2002 9:51 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: Dyno results - 4.7L QC Sleeper Project
>
>
>
> What speed is it cutting out at??
>
> Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4
> "Silver
> Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be
> Finished
> By The End Of July!!
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:55 EDT