2 things... won't that engage the starter ??
Will this work on a 98 318 Auto ??
Marty
http://members.cox.net/got-speed
"Chris Lambert" <dakotausa@comcast.net> wrote in message
news:001401c2209b$f772a2a0$97693144@dalect01.va.comcast.net...
>
> You could always turn the key all the way forword right before you hit the
> limiter. That will disable the spedo and the limiter while your doing the
> test. You have to hold it the whole time Just don't shift while your doing
> it if it is a 5 speed.
>
> Chris
>
> ----- Original Message -----
> From: crm <tb.crm@verizon.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, June 29, 2002 11:26 PM
> Subject: RE: DML: Dyno results - 4.7L QC Sleeper Project
>
>
> >
> > the guy running the dyno said something about 110 but i "corrected" him
> > and said 98 cuz i thought it was 98. now, he was in the cab and in front
> > of the speedo, so he mighta been right, and i hope he is. i'm going back
> > in a couple weeks to run it again to test out the Fastman TB i just
> > installed so i'll have them watch it really close. it will prolly cut
> > out again in 3rd but i was getting good numbers so i dont mind :) and
> > that way i'll know for sure what the speed limiter is. unless there is a
> > rev limiter in 3rd gear???
> >
> > -adam
> >
> > -----Original Message-----
> > From: owner-dakota-truck@dakota-truck.net
> > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Olznut@aol.com
> > Sent: Saturday, June 29, 2002 9:51 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: Dyno results - 4.7L QC Sleeper Project
> >
> >
> >
> > What speed is it cutting out at??
> >
> > Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4
> > "Silver
> > Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be
> > Finished
> > By The End Of July!!
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:55 EDT