Hey Bernd, did you get my timing chain?
Rascal
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Bernd D.
Ratsch
Sent: Tuesday, July 02, 2002 10:05 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: transgo shift kit questions
Chad,
The "Race or Show-Off" setting is a bit too aggressive for the street
use (unless you like "barking" the tires on the 1-2 shift). We set them
at the low end of the more aggressive range to keep it at a happy medium
between the two. Make sure you install the ORANGE spring and grind the
appropriate valve according to the instructions. Some don't grind these
which causes oscillations and possible failures in the springs (breaking
them).
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Chad Evans
Sent: Monday, July 01, 2002 9:45 PM
To: dakota-truck@dakota-truck.net
Subject: DML: transgo shift kit questions
for those who have a the transgo kit installed. what level of firmness
did
you go with ? i am in the process of turning my dak into a show truck so
it
won't see any winter weather(i hope not).is the full strip to much for
the
street ? thanks , chad
_________________________________________________________________
Join the world's largest e-mail service with MSN Hotmail.
http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT