Thanks for the update John. Mine does the same thing, but I haven't had
the time to check for any cracks in those lines. I'm going to take a look
tonight. I hope mine is as simple as yours. Again, thanks for the update!
--Aaron--
95 DSRC 4x4 V6
http://www.geocities.com/adakota4x4_95/
From: "jkp" <jkp61@horizonview.net>
Reply-To: dakota-truck@dakota-truck.net
To: "DML" <dakota-truck@dakota-truck.net>
Subject: DML: A/C Dash vent info
Date: Tue, 2 Jul 2002 13:24:56 -0400
If you all remember I posted a problem with the vents switching from
the
dash to the floor then off while accelerating and Jon from St.Louis had the
same problem. Well I fixed mine today, probably the cheapest fix I have ever
done. First I checked the check valve from the manifold and it was OK, then
I started pulling all the vacuum lines running from the intake to the vacuum
ball to the firewall. All of the rubber ones were fine, BUT the plastic line
was broken 2/3 of the way through about 2 inches from the firewall on the
bottom(almost looked cut). I snipped the bad part out and put a small piece
of vacuum hose(I had in my parts stash) in between and everything is fine
(for now!). I was hoping it wasn't the vacuum ball leaking or the controls
as Jon suggested. Just wanted everyone to know, maybe now my wife will quit
complaining about the A/C. Total involved about a 1/2 hour and zero cents in
parts!
Take Care & Keep On Truckin'~~~~~John
<<'96 Dakota Sport 4x4, 3.9L 5spd>>
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT