RE: Re: RE: RE: RE: RE: RE: Gauges - WTH?

From: Ronald Wong (ron-wong@cox.net)
Date: Tue Jul 09 2002 - 22:52:41 EDT


But William, he needs to know what thing they're doing when they're doing
it.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of William H.
Hiatt III
Sent: Tuesday, July 09, 2002 7:29 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: RE: RE: RE: RE: RE: Gauges - WTH?

hold the odometer reset button and turn the key to the "on" position. keep
holding the odometer reset button until you see a "CHEC" come across. the
gauges and display will do there thing.

william
----- Original Message -----
From: "The Stewarts" <firebird@kymtnnet.org>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, July 09, 2002 7:02 PM
Subject: DML: RE: RE: RE: RE: RE: Gauges - WTH?

>
>
>
> Somebody, anybody, eveybody, get the.............. instructions and info
on
> this. LOL
>
> -Ryan
> 99 DA RC R/T
> Limp Bizkit fans might laugh.
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Ronald Wong
> Sent: Tuesday, July 09, 2002 9:57 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: RE: RE: Gauges - WTH?
>
>
>
> I can't remember how. I know it puts the speedo at certain mph as it goes
> through the test. Also it does the same thing to other gauges relatively.
> Someone will remember here shortly or I'll have to look it up.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of The Stewarts
> Sent: Tuesday, July 09, 2002 5:41 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: RE: Gauges - WTH?
>
>
>
> How do I do that Ron? And what exactly will the test do?
>
> Thanks much.
>
> -Ryan
> 99 DA RC R/T
> Yep.
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Ronald Wong
> Sent: Tuesday, July 09, 2002 8:23 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: Gauges - WTH?
>
>
>
> If you do the instrument gauge test it'll show you where the needles
should
> be.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Kevyn Snary
> Sent: Tuesday, July 09, 2002 7:06 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Gauges - WTH?
>
>
>
> I did the gauges in mine.
>
> First does he have the old gauge face I took this and with a few cuts
> with a razor blade I made a mount for the Indiglo plate by then super
> gluing the two together this keeps the new face in the right position.
>
> Second getting them accurate unfortunately I did this by know what they
> were before I started, the only suggestion I have is to disassemble the
> dash and while it is apart try running the engine and driving the truck
> then adjusting the needles to get it accurate.
>
> Third as to the "sticking" when you push the needles back onto the pins
> don't push it all the way just place them so they are snug this stops
> the needle from dragging on the face and hence sticking.
>
> Hope this helps
>
> Kevyn Snary
> 00 RC R/T
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of The Stewarts
> Sent: Tuesday, July 09, 2002 6:08 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Gauges - WTH?
>
>
> OK, my friend isntalled indiglo gauges on my truck. First off, how do I
> get
> them accurrate, they are wholly inaccurated.
>
> Second, they stick, especially my speedo, how do I fix this?
>
> And finally, just Saturday they've started going out at night leaving
> only
> the needles glowing, sometimes they come back on, then back off, it's
> all
> random. WHAT THE HECK?!?!
>
>
> My friend really messed this stuff up. Please help! LOL
>
> -Ryan
> 99 DA RC R/T
> Going, hell, I don't know, speedo is stuck and the lights are out!
>
>
>
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:03 EDT