-----Original Message-----
Subject: Re: DML: Dakota won't go above 800 rpm
>From: Bob Tom <tigers@bserv.com>
>
>Going on the assumption that the rebuild is aok, my
>guess would be that there's something wrong in the
>fuel delivery system and the engine is not getting
>enough gas. A lean condition will raise temps. quickly
>and easily and this may account for your "running very hot".
>HTH
>
>Bob Tom
Another thing to check is the timing and the advance. If the timing is too
far off or is not advancing correctly the engine will not accelerate and
could run hot.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:04 EDT